| Model | NCS1002-K9 |
| WAN Interface | 2 x 100 Gigabit Ethernet QSFP28 ports |
| LAN Interface | None |
| USB Interface | 1 x USB 2.0 port |
| VPN | IPSec VPN, SSL VPN |
| Firewall | Stateful firewall, application-aware firewall |
| NAT | NAT/PAT |
| QoS | Classification, policing, shaping, queueing |
| Security | ACLs, MACsec, IPS, IDS, DDoS protection |
| Management | Web-based GUI, CLI, SNMP, RMON |
| Memory | 16 GB DRAM, 32 GB flash memory |
| Routing Protocols | BGP, OSPF, IS-IS, EIGRP, RIP, PIM, IPv4, IPv6 |
| Power Supply | 2 x AC or DC power supplies (redundant) |
| Cooling | Fanless |
| Latency | 1.5 microseconds |
| Switching Capacity | Up to 2 Tbps |
| Forwarding Rate | Up to 1.5 Bpps |
| Dimensions | 1.73 x 17.25 x 22.5 inches (H x W x D) |
| Weight | 51 lbs |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Operating Humidity | 10% to 90% non-condensing |
| MTBF | 500,000 hours |
| Warranty | Limited lifetime hardware warranty |
| Certifications | UL 60950-1, CAN/CSA-C22.2 No. 60950-1, IEC 60950-1, EN 60950-1, AS/NZS 60950-1, GB4943-2011, FCC Part 15 (CFR 47) Class A, EN55022 Class A, CISPR22 Class A, AS/NZS CISPR22 Class A, EN300386, VCCI Class A, KN22 Class A, KN24, CE Marking |
| Compatibility | Cisco Network Convergence System 1000 Series |
| Hot Swappable | Yes |
| Redundancy | N+1 |
| Current | 16 A (maximum) |
| Power Cord | 2 x AC power cords included |
| Safety | Over voltage protection, over current protection, short circuit protection |
| Environmental | RoHS 6 compliant |
| Certifications | TUV-GS, CB, CE, PSE, UL, cUL, CCC, BSMI, EAC, PSB, SIRIM, NOM, GOST-R |
There are no reviews yet.